BE SURE TO INDICATE HOW MANY LED YOU WANT IN YOUR TOWER ( 5 - 9 or 20 )
TOWER COMES WITH INTERCHANGABLE CLEAR OR FROSTED LENS. TOWER CAN BE SET UP VERTICAL OR LAID FLAT NEXT TO TRACK OR PLACED ONTOP OF OUR NEW BRIDGE DESIGN OR ON TOP OF ITS OWN BRIDGE THAT SPANS THE TRACK !!
Here are current functions supported:
# Countdown [1-5]: 1 to 5 leds or more that mimic the race software countdown
# Fuel Level [1-8]: A ' color thermometer' displaying the fuel level of each lane. If the same lane is assigned just 1 or 2 leds, the leds will go from green to yellow to red as fuel decreases, BUT if 3 or more leds are setup for the same lane, then a shading of red, yellow and green will display. As the fuel level decreases the green leds will turn off, then the yellow will turn off, then the red.
# Heat Leader: 1 to 25 LED indicating which lane is in the lead for the heat. The led will be the color of the lane in the lead. Lane color choices are upto 256 colors
# Heat Leader [1-8 lanes]: 1 to 25 LED indicate who's in the lead. The led will be off if the driver is not in the lead or white if the leader for the lane is in the lead.
# Heat Time: A 'color thermometer' displaying the time left in the heat. If just 1 or 2 leds are assigned this option, the leds will go from green to yellow to red as the heat gets closer to ending, BUT if 3 or more leds are setup then a display of red, yellow and green will display. As the heat gets closer to the end, the green leds will turn off, then the yellow will turn off, then the red.
# Lap Indicator [1-8 lanes]: Turns on the color of the lane that just counted a lap for 1 second. If a lap sensor is triggered but the lap is not counted for any reason the led will not turn on.
# Race State [1- 25 LED]: typically 5 leds that show the current race state. This includes a slightly countdown display, going green, yellow, red based on the state of the heat/race. Heat over and yellow flag states will flash at the rate configured in the LED configuartion menu.
# Refueling [1-8 lanes]: Once a car is in the refueling zone (either over the sensor or pit zone area) this led will turn white indicating the begin of refueling. This led will come on before you actually start refueling depending on the "refuel delay" config option.
THE BELOW IS NOT SUPPORTED BUT YOU ARE ENCURAGED TO EXPERIMENT WITH DIFFERENT COMBINATIONS
DEPENDING ON THE NUMBER OF LED WITHIN YOUR MULTI FUNCTION TOWER YOU CAN CONFIGURE ANY COMBINATION OF THE ABOVED FEATURES INCLUDING USING OR SKIPPING LED FOR SPACING OF LEDS FOR LOCATION OR APPERANCE. EXAMPLE ONE OR MORE LED OVER A LANE.
COMBINATIONS OF THE ABOVE ARE NOT SUPPORTED BECASUE THERE ARE SO MANY POSSIBLE CONFIGURATIONS THAT YOU MAY FIND NO ISSUE OR POSSIBLY ISSUE CONCERNING FUNCTION OR LOOK OR RESULTS OF YOUR COMBOS.
BUT ITS FUN TO EXPLORE THE POSSIBLITIES OF COMBOS. IF YOU FIND A COMBO THAT WORKS WELL OR LOOKS GREAT YOU CAN SUBMIT A SCREENSHOT OF THE SOFTWARE LED SETTINGS WITHIN THE LED DROP DOWN MENU AND WE WILL SHARE IT ON OUR SITE FOR OTHERS TO TRY.
AS TIME AND EXPLORATION ALLOWS WE WILL POST A FEW OF THE COMBOS WE LIKE FOR EXAMPLES OF WHAT YOU CAN TRY.