-

VIASUE SLOT CAR LAP COUNTER AND SLOT CAR LAP TIMER SOLUTIONS
ABOUT US SLOT CAR LAP COUNTING AND TIMING, COUPONS FOR SLOT CAR LAP COUNTING,FORM SUBMISSION USB SLOT CAR LAP COUNTING & TIMING,
FUNCTIONS & ADD ON FEATURES,PHOTO GALLERY FRO SLOT CAR LAP TIMING,SUPPORT FOR SLOT CAR COUNTINNG LAP TIMING,

A SLOT CAR LAP COUNTING & TIMING RACING SYSTEM THAT "WORKS GREAT" 100% PLUGnPLAY

SUPPORT FOR SLOT CAR LAP COUNTING, LAP TIMING

USB Racing System Setup - Instructions
Please follow the below installation steps:

Thank you for looking into Support & Links


  1. BEFORE ATTEMPTING SET UP 
  2. PLEASE WATCH THE VIDEOS ON YOUR SET UP CD
  3. THE SAME VIDEOS CAN BE WATCHED VIA THIS PAGES LINK CALLED 
  4. BASIC USB SET UP VIDEO PART 1
  5. BASIC USB SET UP VIDEO PART 1
  6. After watching the videos Power off your race computer
  7. Remove all components from the packaging and inspect them for physical damage.
  8. If anything appears physically damaged please do not delay and contact us for further instructions
  9. Although housing is professional secured, take care of the installed sensors & underside wiring
  10. Install your new sensor track and the light bridge into your layout.
  11. Place the light bridge by centering front to back and side to side over the sensors installed.
  12. Be sure the light bridge power cable is on the same side as the sensor cable from your track
  13. You will notice a notched area in the protective wire cover under the track. This is used with great care so you can, more easily redirect the cable through the table top or leave as is out the side
  14. With the PC off, Plug the male light bridge plug into the round female power cable plug
  15. With the PC off, Plug the square USB cable plug into the micro-processor unit (the tan box)
  16. With the PC off, Plug the rectangle USB cable into your PC USB port
  17. Power on your race computer only after all of the hardware have been connected properly
    • If or When Your Windows PC asks / offers to Install Software Drivers or software files "Cancel / Abort Windows effort to install it's software driver files."
    •  The RMS software driver installation will handle software driver install for you automatically, by installing the proper software drivers, that have been tested for your system.
  18. Insert the installation CD into your PC CD-Rom drive
    • The RMS installer on the majority of PC's will auto-run, however if it does not, browse the CD and double click the "RaceCoordinator_v*.exe" file to run the installer manually
    • The installer will install .NET 4 if needed including the processor drivers. If you are prompted with windows pop up text box, asking if this is okay, please make sure to accept the installs, including accepting any and all un-certified drivers and such.You will be fine :>)


IF this is the first time you've installed Race Coordinator, there will be only one default track and it will be selected by default, by simply clicking "Auto Configure" and the installer will do the rest.
IF RC is already installed you can select the track(s) you created before or use the setup default track
  1. Once installed you should be ready to race. Race Coordinator comes with some default drivers icons and race configurations. Give them a try and have fun!
  2. To quickly and correctly understand all of the great features in RC please visit the online
  3. RC video tutorials


Thank You for your time and effort. Please follow the above and all will go as planned :>)
Ho, 1/24th, 1/32nd, 1/64th, Scale Slot Car track Racing Solutions and system for AFX, Tomy,Tyco,Lifelike, SCX, & Autoworlds